
 Celebi M, Ghahari SF, Taciroglu E (2015). “Unusual downhole and surface freefield records near the Carquinez Strait bridges during the 24 August 2014 Mw6.0 South Napa, California earthquake,” Seismological Res. Letters, 86(4), 17.
 Celebi M, Kashima T, Ghahari SF, Taciroglu E (2015). “Responses of a US codetype instrumented tall building in Tokyo Japan to events before, during and after the Tohoku earthquake of March 11, 2011,” Earthquake Spectra (in print).
 Celebi M, Hisada Y, Omrani R, Ghahari SF, Taciroglu E (2015). “Responses of two tall buildings in Tokyo, Japan, before, during and after the M9.0 Tohoku Earthquake of March 11, 2011,” Earthquake Spectra (in print).
 Zareian F, Kaviani P, Taciroglu E (2015) “Multiphase performance assessment of seismic response of structures,” ASCE Journal of Structural Engineering (in print).
 Lotfollahi M, Alinia MM, Taciroglu E (2015). “A balanced design approach for diagonally braced moment resisting frames based on hierarchical yield and failure sequences,” Engineering Structures, 87, 198219.
 Xu SY, Shamsabadi A, Taciroglu E (2015). “Evaluation of active and passive seismic earth pressures considering internal friction and cohesion,” Soil Dynamics & Earthquake Engineering, 70, 3047.
 Stafsudd JZ, Asgari S, Hudson R, Yao K, Taciroglu E (2015). “Moving source localization using seismic signal processing,” Journal of Sound & Vibration, 335: 384396.
 Jung J, Taciroglu E (2014). “Modeling and identiﬁcation of an arbitrarily shaped scatterer using dynamic XFEM with cubic splines,” Computer Methods in Applied Mechanics and Engineering, 278: 101118.
 Prakash A, Taciroglu E, Hjelmstad KD (2014). “Computationally efficient multi‑time‑step method for partitioned time integration of highly nonlinear structural dynamics,” Computers & Structures, 133, 5163.
 KhaliliTehrani P, Ahlberg E, Rha CS, Stewart JP, Taciroglu E, Wallace JW (2014). “Nonlinear deflection behavior of reinforced concrete drilled piles in stiff clay,” Journal of Geotechnical & Geoenvironmental Engineering, ASCE, 140(3), 04013022.
 Ghahari SF, Abazarsa F, Ghannad MA, Celebi M, Taciroglu E (2014). “Blind identification of structures from sparse seismic signals,” Structural Control & Health Monitoring 21(5), 649674.
 Shamsabadi A, Xu SY, Taciroglu E (2013). “A generalized logspiralRankine limit equilibrium model for seismic earth pressure analysis,” Soil Dynamics & Earthquake Engineering, 49, 197209.
 Harb R, Taciroglu E, Ghoniem N (2013). “Partitioning of elastic energy in opencell solid foams under finite deformations,” Acta Materialia, 6, 14541468.
 Jung J, Jeong C, Taciroglu E (2013). “Identification of scatterers embedded in heterogeneous media using dynamic XFEM,” Comp. Meth. Appl. Mech. Engng., 259, 5063.
 Shamsabadi A, Shu XY, Taciroglu E (2013). “A generalized logspiralRankine limit equilibrium model for seismic earth pressure analysis,” Soil Dynamics & Earthquake Engineering, 49, 197209.
 Dong SB, Carbas S, Taciroglu E (2013). “On principal shear axes for correction factors in Timoshenko beam theory,” Int. J. Solids & Structures 50(10), 16811688.
 Harb R, Taciroglu E, Ghoniem N (2013). “Partitioning of elastic energy in opencell solid foams under finite deformations,” Acta Materialia 6, 14541468.
 Ghahari SF, Ghannad MA, Taciroglu E (2013). “Blind identification of soilstructure systems,” Soil Dyn. & Eq. Eng. 45, 5669.
 Ghahari SF, Abazarsa F, Ghannad MA, Taciroglu E (2013). “Responseonly identification of structures using strong motion data,” Earthquake Engineering & Structural Dynamics 42(8), 12211242.
 Abazarsa F, Nateghi F, Ghahari SF, Taciroglu E (2013). “Blind identification of non‑classically damped systems,” Earthquake Spectra 29(4), 11371157.
 Omrani R, Hudson R, Taciroglu E (2013). “Parametric identification of nondegrading hysteresis in a laterallytorsionally coupled building using an unscented Kalman filter,” ASCE Journal of Engineering Mechanics 139(4), 452468.
 Soyoz S, Taciroglu E, et al. (2013). “Ambient and forced vibration testing of a reinforced concrete building before and after its seismic retrofitting” ASCE Journal of Structural Engineering, 139(10), 17411752.
 Abazarsa F, Ghahari SF, Nateghi F, Taciroglu E (2013). “Responseonly identification of structures using limited number of sensors,” Structural Control & Health Monitoring 20(6), 987–1006.
 Omrani R, Hudson RE, Taciroglu E (2012). “Storybystory estimation of the stiffness parameters of torsionshear buildings using forced or ambient vibration data: I. Formulation & verification” Earthquake Engineering & Structural Dyn. 41(12), 16091634.
 Omrani R, Hudson RE, Taciroglu E (2012). “Storybystory estimation of the stiffness parameters of torsionshear buildings using forced or ambient vibration data: II. Application to IASCASCE Benchmark Experiment Data,” Earthquake Engineering & Structural Dynamics, 41(12), 16351649.
 Kaviani P, Zareian F, Taciroglu E (2012). “Seismic behavior of reinforced concrete bridges with skewangled abutments,” Engineering Structures, 45, 137150.
 Elmer W, Taciroglu E, McMichael L (2012). “Dynamic strength increase of plain concrete from high strain rate plasticity with shear dilation,” Int. Journal of Impact Engineering, 45, 115.
 Elmer W, Chen JS, Puso M, Taciroglu E (2012). “A stable, meshfree, nodal integration method for nearly incompressible solids,” Finite Elements in Analysis & Design, 51, 8185.
 Lemnitzer A, KhaliliTehrani P, Rha CS, Taciroglu E, Wallace JW, Stewart JP (2010). “Nonlinear efficiency factors for bored pile group under lateral loading,” Journal of Geotechnical & Geoenvironmental Engineering, ASCE, 136(12), 16731685.
 Dong SB, Alpdogan C, Taciroglu E (2010). “Much ado about shear correction factors in Timoshenko beam theory,” International Journal of Solids & Structures, 47(13), 16511665.
 Shamsabadi A, KhaliliTehrani P, Stewart JP, Taciroglu E (2010). “Validated simulation models for lateral response of bridge abutments with typical backfills,” ASCE Journal of Bridge Engineering, 15(3), 302311.
 Alpdogan C, Dong SB, Taciroglu E (2010). “A method of analysis for end and transitional effects in anisotropic cylinders,” International Journal of Solids & Structures, 47, 947956.
 Elmer W, Stafsudd JZ, Taciroglu E (2010). “Performance of equilibriumbased system identification algorithms with incomplete state data,” Eng. Structures, 32, 483497.
 Taciroglu E, Parsons ID, Acharya A, Namazifard A (2009). “Arbitrary Lagrangian Eulerian methods for regressing solid domains and interface tracking,” Computers & Structures, 87(56), 355367.
 Liu CW, Taciroglu E (2009). “Shape optimization of piezoelectric devices using an enriched meshfree method,” International Journal for Numerical Methods in Engineering, 78(2), 151171.
 Liu CW, Taciroglu E (2008). “Semianalytic meshfree analysis for AlmansiMichell problems of piezoelectric cylinders,” International Journal of Solids & Structures, 45(9), 23792398.
 Stafsudd JZ, Asgari S, Hudson R, Yao K, Taciroglu E (2008). “Localization of acoustic and seismic wideband sources: Algorithms & experiments,” Journal of Sound & Vibration, 312(1), 7493.
 Rha CS, Taciroglu E (2007). “A coupled macroelement model of soilstructure interaction in deep foundations,” Journal of Engineering Mechanics, 133, 13261340.
 Yu E, Taciroglu E, Wallace JW (2007). “Parameter identification of framed structures using an improved finite element model updating method, Part I: Formulation & verification,” Earthquake Engineering & Structural Dynamics, 36, 619639.
 Yu E, Wallace JW, Taciroglu E (2007). “Parameter identification of framed structures using an improved finite element model updating method, Part II: Application to experimental data,”Earthquake Engineering & Structural Dynamics, 36, 641660.
 Taciroglu E, Rha CS, Wallace JW (2006). “A robust macroelement model for soilpile interaction under cyclic loads.” Journal of Geotechnical & Geoenvironmental Engineering, ASCE, 132(10), 13041314.
 Liu CW, Taciroglu E (2006). “Enriched reproducing kernel particle method for piezoelectric structures with arbitrary interfaces,” Int. J. for Numerical Methods in Engineering, 67(11), 15651586.
 Bai H, Shah AH, Dong SB, Taciroglu E, (2006). “End reflections in a layered piezoelectric circular cylinder,” International Journal of Solids & Structures, 43(20), 63096325.
 Stafsudd JZ, Asgari S, Ali A, Chen CE, Hudson RE, Lorenzelli F, Yao K, Taciroglu E. (2006). “Analysis, implementation and application of seismic and acoustic arrays,” Acta Automatica Sinica, 32(6), 929937.
 Taciroglu E, Hjelmstad KD (2005). “The variational basis of nonlinear flexibility methods for structural analysis of frames.” Journal of Engineering Mechanics, ASCE, 131(11), 11571169.
 Taciroglu E, Liu CW (2005). “Analysis and design of multimodal piezoelectric layered tubular sensors and actuators.” Smart Materials & Structures, 14, 605614.
 Bai H, Taciroglu E, Dong SB, Shah AH (2004). “Elastodynamic Green’s functions for a laminated piezoelectric cylinder.” Int. Journal of Solids & Structures, 41(2223), 63356350.
 Taciroglu E, Liu CW, Dong SB, Chun CK (2004). “Analysis of laminated piezoelectric circular cylinders under axisymmetric mechanical and electrical loads with a semianalytic finite element method.” Int. J. Solids & Structures, 41(1819), 51855208.
 Hjelmstad KD, Taciroglu E (2003). “Mixed variational methods for finite element analysis of geometrically nonlinear inelastic BernoulliEuler beams,” Comm. J. Num. Meth. Engrg., 19, 809832.
 Taciroglu E, Hjelmstad KD (2002). “A simple nonlinear model for elastic behavior of cohesionless granular materials,” Journal of Engineering Mechanics, ASCE, 128(9), 969978.
 Hjelmstad KD, Taciroglu E (2002). “Mixed methods and flexibility approaches to BernoulliEuler beam finite elements,” Journal of Const. Steel Res., 58, 967993.
 Hjelmstad KD, Taciroglu E (2000). “Analysis and implementation of resilient modulus models of response of granular solids,” Journal of Engineering Mechanics, ASCE, 126(8), 821830.
